Solar Power by CBECL: Industrial Solar Power System Cost & ROI Calculator

Industrial & Commercial Grade

Industrial Solar System Cost & ROI Estimator

Calculate baseline system sizing, total capital investment, payback timeframe, and 25-year cumulative financial savings tailored for industrial facilities.

Facility Parameters

Calculation Mode

Average Monthly Electricity Bill $25,000

$

USD/mo

Electricity Tariff Rate ($/kWh) $0.14 / kWh

Solar Bill Offset Target 80% Offset

Target percentage of facility load offset by solar energy.

Installation Structure Type Industrial Metal Shed Roof ($0.95/W) Concrete RCC Flat Rooftop ($1.05/W) Ground-Mounted Facility Array ($1.15/W) Solar Carport Structure ($1.35/W)

System Architecture On-Grid (Grid-Tied, Net Metered) Hybrid with Storage (2 Hrs Battery Backup) Hybrid with Storage (4 Hrs Battery Backup)

Average Daily Peak Sun Hours (PSH) 4.5 hrs/day

3.0 (Low/Moderate) 4.5 (Global Avg) 7.0 (High Solar Zone)

Tax Credits / Incentives (%) 30% ITC

System Size

0 kWp

~0 sq. ft req.

Net Investment

$0

$0 Gross

Payback Period

0 Years

0% Internal Return

Financial Impact

Estimated Power Savings

$0 Saved / Year

Daily Generation 0 kWh

Annual Generation 0 MWh

Monthly Savings $0

25-Yr Net Savings $0

Solar PV Modules (45%) $0

Inverters & Power Electronics (15%) $0

Mounting Structures & Hardware (15%) $0

BOS & Electrical Protection (12%) $0

EPC Installation & Engineering (13%) $0

Estimated annual environmental offset achieved by shifting facility load to solar power:

Annual CO2 Offset 0 Tons

Tree Equivalent 0 Trees

Coal Avoided 0 lbs

Assumes 3.5% annual utility tariff inflation and standard 0.5%/year panel degradation.

Disclaimer: This tool provides preliminary estimations based on standard industrial benchmark averages (degradation rate 0.5%/yr, system efficiency loss ~14%). Actual commercial engineering assessments require detailed site irradiance studies, structural roof integrity audits, grid interconnection constraints, and local utility regulations.

Industrial Solar Feasibility & Cost Assessment Report

Generated via Industrial Solar Cost Estimator Tool

Metric	Estimated Value
Recommended System Size	-
Est. Required Rooftop Area	-
Gross System Turnkey Cost	-
Tax Credits & Incentives	-
Net Capital Investment	-
Estimated Annual Generation	-
Year 1 Electricity Savings	-
Estimated Payback Period	-
25-Year Cumulative Net Savings	-

Note: This document is an initial preliminary feasibility outline. Actual production, component pricing, structural roof suitability, and utility grid interconnection terms must be verified through a certified EPC contractor.